Cooling System Maintenance; Removing Debris From The Cooling System - Toro 03674 Operator's Manual

Cooling System
Maintenance
Removing Debris from the
Cooling System
Remove debris from the screen, oil coolers, and radiator daily
(clean more frequently in dirty conditions).
1. Turn the engine off and remove the key from the
ignition switch.
2. Thoroughly clean all debris out of the engine area.
3. Unlatch the clamp and pivot open the rear screen
(Figure 64).
Figure 64
1. Rear screen latch
4. Clean the screen thoroughly with compressed air.
5. Pivot the latches inward to release the oil cooler
65).
2. Rear screen
(Figure
1. Oil cooler
6. Thoroughly clean both sides of the oil cooler and the
radiator (Figure
1. Radiator
7. Pivot the oil cooler back into position and secure the
latches.
8. Close the screen and secure the latch.
46
Figure 65
2. Oil cooler latches
66) with compressed air.
Figure 66