Toro 03674 Operator's Manual page 21

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine
are multiple display screens on the InfoCenter. You can
switch between the screens, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
Figure 27
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
(Figure 27) There
g020650
2
3
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
21
Indicates when scheduled service
should be performed
Hour meter
Info icon
Fast
Slow
Fuel level
Glow plugs are active
Raise cutting units
Lower cutting units
Operator must sit in seat
Parking Brake Indicator—indicates
when the parking brake is On
Identifies the range as High
(Transport)
Neutral
Identifies the range as Low (Mow)
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
PTO is engaged
Denied or not allowed
Engine Start
Stop or shutdown
Engine
Key switch