Sound Pressure; Sound Power; Vibration Level - Toro GrandStand 74568TE Operator's Manual

General Operation
• Be sure the area is clear of other people before
mowing. Stop the machine if anyone enters the area.
• Do not touch equipment or attachment parts which
may be hot from operation. Allow to cool before
attempting to maintain, adjust or service.
• Use only Toro approved attachments. Warranty may
be voided if used with unapproved attachments.
• Check carefully for overhead clearances (i.e.
branches, doorways, electrical wires) before
operating under any objects and do not contact
them.
• Slow down before making turns and use extra
caution.
• Use caution when riding the platform over curbs,
rocks, roots, or other obstructions.
• Look behind and down before backing up to be sure
of a clear path. Use extra care when operation in
reverse.
• Never jerk the controls; use a steady motion.
• Do not carry passengers.
Slope Operation
All slopes and ramps require extra caution. If you feel
uneasy on a slope, do not mow it.
• Remove obstacles such as rocks, tree limbs, etc. from
the mowing area.
• Watch for holes, ruts or bumps. Tall grass can hide
obstacles.
• Use caution near drop-offs, ditches, or embankments.
The machine could suddenly turn over if a wheel
goes over the edge of a cliff or ditch, or if an edge
caves in.
• Use extra care with grass catchers or other
attachments. These can change the stability of the
machine.
• Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction.
• Mow slopes side to side.
Service
• Never store the machine or fuel container inside
where there is an open flame, such as near a water
heater or furnace.
• Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good
condition.
• Never tamper with safety devices. Check safety
systems for proper operation before each use.
• Use only genuine replacement parts to ensure that
original standards are maintained.
• Check brake operation frequently. Adjust and service
as required.

Sound Pressure

This unit has a sound pressure level at the operator's
ear of 93 dBA, which includes an Uncertainty Value (K)
of 1 dBA.
The sound pressure level was determined according to
the procedures outlined in EN 836.

Sound Power

This unit has a guaranteed sound power level of 105
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 11094.

Vibration Level

Hand-Arm
Measured vibration level for right hand = 1.1 m/s
Measured vibration level for left hand = 0.8 m/s
Uncertainty Value (K) = 0.6 m/s
Measured values were determined according to the
procedures outlined in EN 836.
Whole Body
Measured vibration level = 0.74 m/s
Uncertainty Value (K) = 0.37 m/s
Measured values were determined according to the
procedures outlined in EN 836.
6
2
2
2
2
2