Product Overview; Controls - Toro GrandStand 74568TE Operator's Manual

Product Overview

1. Side discharge chute
2. Battery
3. Engine
4. Fuel shut-off valve
5. Fuel tank

6. Controls

Controls
Become familiar with all the controls (Figure 5) before
you start the engine and operate the machine.
Figure 4
7. Control levers
8. Manual tube
9. Platform (down position)
10. Hydraulic tank
11. Mower deck
12. Front caster wheel
4
3
14
13
12
11
1. Parking brake lever
2. Choke
3. Hour meter
4. Ignition switch
5. Speed control lever
6. Fuel gauge
7. Height-of-cut lever
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 6).
Fuel Gauge
The fuel gauge is located on the top, middle of the tank
(Figure 5).
Safety Interlock Indicators
There are symbols on the hour meter and indicate with
a black triangle that the interlock component is in the
correct position (Figure 6).
Battery Indicator Light
If the ignition key is turned to the On position for a few
seconds, the battery voltage will be displayed in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 6).
12
7
6 8
5
g012844
Figure 5
8. Fuel cap
9. Height-of-cut pin
10. Platform latch
11. Throttle control
12. Right motion control lever
13. Blade control switch (PTO)
14. Left motion control lever
9
10