·
Create a new size
Printer menu
right click to get
pop-up menu in blank
space
select "Server
Properties"
enter a form name for
the new form in "Form
name"
reset the paper size in
the specific squares of
the "Form description"
click "OK"
43
12. Troubleshooting
Generally, when a malfunction or an abnormal condition occurs,
the "READY" LED will keep blinking and printing and
communication between the host and printer will stop.
To understand what the problem, please check
the LEDs.
12.1 Problems on media
Possible Problems Solutions
Missing gap
. Check the media
path.
. Check the position of
label sensor.
Media out
. Supply the media
roll.
Media not installed . Install the media roll.
Media jam
. Recover the jam.
If everything is okay try to mark the label sensor calibration.
(Refer to chapter 7)
Remarks
If you use continuous
media, check your
application soft ware
and driver. You should
select continuous.
44
Need help?
Do you have a question about the COMPACT SERIES and is the answer not in the manual?