Performing Calibration; Printing Configuration Report - Meteor COMPACT SERIES User Manual

7. Performing Calibration

After the media loaded, it is necessary to do the calibration for
the label size detection.
7.1 Press and hold the pause button.
7.2 Turn on the power.
7.3 Media indicators will blink, at this point release PAUSE
button.
7.4 The printer will feed the labels for 12 inches.
7.5 Media indicators stop blinking and remain illuminated.
Note:
This procedure is very important and must always be carried
out after installation and every time the media type is changed.
Failure to do so will result in the gap and label-empty detection
being incorrect.
25
8.

Printing Configuration Report

Performing the Self Test
1. Turn off the printer. Press and hold the feed button.
2. Turn on the power.
3. Ready indicator blinks, release feed button.
4. The printer will print out a configuration report.
5. Ready indicator stops blinking and lights up.
6. The following information will be printed on this report.
Note:
After self test the printer will enter character dump mode. For
normal operation press the cancel button to exit from dump
mode.
26