Set The Parameters - Meteor COMPACT SERIES User Manual

2. If you install a new bar code application software
like LabelView or CodeSoft, the Label Dr. 200 (or Label
Dr. 300) driver should be activated and set as the current
printer driver:
·
LabelView
File Select Printer Label Dr. on LPT1:
·
CodeSoft
File Printer Windows Label Dr. on LPT1:
·
LabelMatrix
File Printer Setup Label Dr. on LPT1:
OK
OK
OK
31

11.3 Set the Parameters

After installing the driver, you can follow the path below to set
parameters:
Start Settings Printers
The parameters include:
·
Ports
Select the I/O port to link with the printer. The port may be
one of parallel (LPT), serial (COM), network port or file.
·
Paper size
Select the paper size on the menu. If there is no
desired size, select "Custom" (only in Win98/95/Me) to define the
paper size.
·
Create a new size
Define paper size in Win 2000/XP/NT4.0.
·
Orientation
Set portrait or landscape according to the print
direction.
·
Paper source (Media type)
(ribbon) mode and D/T for direct thermal mode (without ribbon).
·
Media choice (Darkness)
this field. The darkness value ranges from 0 to 15.
·
Copies
This function designates the number of printed copies of
each page.
·
More option (Accessory setting)
peeler function you still need to enter More Options and select one of
the items.
·
Device options (Speed)
Compact-400, the speed ranges from 2 to 6 IPS; for Compact-600 it
ranges from 2 to 4 IPS.
Label Dr. Properties
T/T stands for thermal transfer
Set the heat value or darkness from
To use the cutter and
Set the printer speed. For
32