JUKI MF-7700D Series Engineer's Manual page 99

Adjustment Procedure
1. Installing procedure of the synchronizer
(1) Using two setscrews
sewing machine. Then, install synchronizer
(2) Fix a cord of synchronizer
means of cable clip band
position, using cord clamp
2. Installing procedure of the resistor pack (asm.)
Install resistor pack (asm.)
screw .
3. Installing procedure of the exclusive cord for MF
Connect the exclusive cords for MF to the respective designated con-
nectors as follows.
• Synchronizer cord
• Resistor pack asm.
• Thread trimmer sensor cord
• Thread trimmer code
• Presser lifter cord
, mount synchronizer fixing plate
to synchronizer fixing plate
. Fasten the cord in the illustrated
and setscrew .
on cylinder installing base
→ CN33
→ CN32
→ CN42
→ CN36
→ CN37
on the
on it.
by
with set-
– 95 –
Results of Improper Adjustment
UT31