JUKI MF-7700D Series Engineer's Manual page 57

Specified
No.
(4) When you want to advance the setting No., press
switch to advance the setting No.
When you want to return the setting No., press switch
to return the setting No.
(Caution) 1. When switch
pressing, the setting No. will return
(will advance) continuously.
2. When the setting No. is advanced (re-
turned), the contents which are before
by one (after by one) will be changing
the contents (up/down switch is
touched).
EXAMPLE) CHANGING THE FLICKER REDUCING
FUNCTION (SETTING No. 5)
Press switch five times to set the setting No. to "5".
Press switch five times to change the set No. to "5"
since the current set value is displayed on LED
(Standard : "0")
(Caution) Keep pressing switch
the setting value can be changes continu-
ously.
(5) When the change has been completed, press switch
or to specify the changed value.
(Caution) 1. When turning OFF the power before
performing this work, the contents
which have been changed are not up-
dated.
2. Press switch
will change to the contents of thew
setting No. which is before by one.
3. Press switch
will change to the contents of next set-
ting No. After completing the opera-
tion, turn OFF the power and turn ON
the power again to return to the nor-
mal operation.
After completing the operation, turn OFF the power and
turn ON the power again return to the normal operation.
– 53 –
(switch ) is held
.
or switch , and
, and screen display
, and screen display