CONTENTS 1. SPECIFICATIONS ........................1 2. DRAWING OF TABLE (SEMI-SUBMERGED TYPE) ..............2 3. INSTALLATION OF THE DUST CHUTE ..................3 4. OPENING AND CLOSING THE COVER ..................4 5. ADJUSTMENT PROCEDURE OF THE KNIFE PRESSURE ............4 6. ADJUSTMENT PROCEDURE OF KNIFE CUTTING POSITION .............. 5 7.
1. SPECIFICATIONS Model MF-7500-E11 Class name With fabric undertrimmer for elastic tape attaching Sewing speed Max. 6,000 sti/min (5,000 sti/min with MD) (at the time of intermittent operation) Speed of stitch at the delivery. 4,000 sti/min (at the time of intermittent operation)
3.INSTALLATION OF THE DUST CHUTE 1) Install dust chute ❶ with two wood screws ❷ . ❷ ❶ 2) Install dust chute bracket ❸ with three wood ❹ screws ❹ . ❸ ❻ 3) Install dust chute A ❺ with three screws ❻ . Dust chute A can be installed in two different orientations.
4) Put dust chute B ❼ on the claws of dust chute A ❺ to fix it. ❺ ❼ 4.OPENING AND CLOSING THE COVER WARNING : To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow- ing work after turning the power off and ascertaining that the motor is at rest.
6.ADJUSTMENT PROCEDURE OF KNIFE CUTTING POSITION WARNING : To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow- ing work after turning the power off and ascertaining that the motor is at rest. Adjust the distance between the right-hand needle ❸...
❶ before using the sewing machine for the first time after the delivery or using it after an extended period of disuse. For the lubricating oil, use JUKI GENUINE OIL 18. ❶ ❷ – 6 –...
❷ ❺ ❸ ❹ ❽ ❻ ❾ ❼ ❶ 10.ADJUSTMENT PROCEDURE OF FRONT-UP AMOUNT OF THE PRESSER FOOT WARNING : To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow- ing work after turning the power off and ascertaining that the motor is at rest. When sewing a thick rubber sheet or the like together, fabric can be smoothly fed by raising the front of presser foot ❶...
14.ADJUSTING THE ANGLE OF MESH OF THE KNIFE WARNING : To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow- ing work after turning the power off and ascertaining that the motor is at rest. 1) Remove cloth plate, left ❶...