Christie E SERIES User Manual page 47

Image is out of focus

-
-
-
The image is stretched when displaying 16:9 DVD title

-
-
-
Image is too small or too large

-
-
Image has slanted sides

-
Lamp burns out or makes a popping sound

-
E Series User Manual
020-000287-01 Rev. 1 (01-2011)
Downloaded from ProjectorsManual.com Manuals
Make sure the lens cap is removed.
Adjust lens focus to fit.
Make sure the projection screen is between the required distance.
When you play anamorphic DVD or 16:9 DVD, the projector will show
the best image when the projector display mode is set to 16:9 in the
OSD.
If you play 4:3 format DVD titles, please change the format to 4:3 in the
projector OSD.
If the image is still stretched, you will also need to adjust the aspect
ratio by setting the display format as 16:9 (wide) aspect ratio type on
your DVD player.
Adjust lens zoom to fit.
If it does not fill the screen properly, verify that the correct lens is in use
or change the position of the projector.
Reposition the projector so that it is perpendicular to the screen.
When the lamp reaches its end of life, it will burn out and may make a
loud popping sound. If this happens, the projector will not turn on until
the lamp module has been replaced.
Section 5: Appendices
5-3