Parking Brake Lever - Toro 22323 Operator's Manual

1. Lower the loader arms
2. Raise the loader arms
3. Tilt the attachment
rearward
By moving the lever to an intermediate position (such as,
forward and left), you can move the loader arms and tilt the
attachment at the same time.
Loader Valve Lock
The loader valve lock secures the loader arm/attachment tilt
lever so that you cannot push it forward. This helps to ensure
that no one will accidentally lower the loader arms during
maintenance. Secure the loader arms with the lock anytime
you need to stop the machine with the loader arms raised.
To set the lock, lift up on it so it clears the hole in the control
panel and swing it to the left in front of the loader arm lever,
pushing it down into the locked position (Figure 12).
Figure 12
1. Loader valve lock
Loader Control Reference Bar
The loader control reference bar helps stabilize your hand
while operating the loader arm/attachment tilt lever.
Figure 11
4. Tilt the attachment forward
5. Detent (Float) position
2. Loader arm/attachment tilt
lever
Auxiliary Hydraulics Lever
To operate a hydraulic attachment in the forward direction,
rotate the auxiliary hydraulics lever rearward and pull it down
to the reference bar (Figure 13, number 1).
To operate a hydraulic attachment in reverse direction, rotate
the hydraulics lever rearward, then move it left into the upper
slot (Figure 13, number 2).
If you release the lever while in the forward position, the lever
will automatically return to the neutral position (Figure 13,
number 3). If it is in the reverse position, it will remain there
until you pull it out of the slot.
1. Forward flow hydraulics
2. Reverse flow hydraulics

Parking Brake Lever

To set the parking brake, push the brake lever forward and to
the left and then pull it rearward (Figure 14).
Note: The traction unit may roll slightly before the brakes
engage in the drive sprocket.
To release the brake, push the lever forward and then right,
into the notch.
Fuel Gauge
This gauge measures the amount of fuel in the fuel tank.
Engine Oil Pressure Light
If the engine oil pressure gets too low, this light illuminates
and an audible alarm sounds. If this happens, stop the engine
15
Figure 13
3. Neutral
Figure 14