Audio Receiver Functions (continued)
Audio Turntable Functions
Use the transport keys to control
your CD player (if applicable).
Use SLEEP to activate your audio receiver's
sleep timer (not available for all devices).
After programming, press M1 ~ M3 once to
run a desired macro (see Using Macros on
After programming, press L1 ~ L4
once to activate a learned function.
See Using Learning on page 29.
Use to turn on or off the key backlight.
When this feature is activated, keys will
remain backlit for 5 seconds after the last key
press. In the setup mode, backlighting
will remain on for 30 seconds.
Use SET for all programming sequences.
Press AUX once to control your audio turn-
table. See Re-assigning Device Keys on page 32.
Press POWER once to turn on or off the
selected device (e.g, AUX).
Use GUIDE to display your audio turntable's
program guide (if applicable).
Use INFO to display the audio turntable's
Use SELECT to select a disc. Use
select the next (or previous) LP. Use
to select the next (or previous) track.