Audio Receiver Functions
Press RCVR/AMP once to control your audio
Press POWER once to turn on or off the
selected device (e.g, RCVR/AMP).
Use GUIDE to display your audio receiver's
program guide or setup menu.
Use INFO to display the audio receiver's
Use SELECT to set the surround sound. Use
) to adjust the volume higher (or lower).
(or ) to adjust the balance left (or
Use VOL+ (or VOL-) to raise (or lower) the
audio receiver's audio volume.
Press MUTE once to turn the audio receiver's
audio off or on.
Use CH+ (or CH-) to select the audio receiver's
next higher (or lower) station (if applicable).
Use PREV to change the radio band
Use the keypad (1 ~ 9 and 0) to
select audio sources (e.g., 1~ 10). If
the original remote control required
pressing an Enter key to change the
audio source, also press the ENTER
key after the source number (e.g.,
Press ENTER once after entering the source
numbers on some audio receivers.
Use TV/VID to switch the audio receiver
between input and output.
continued on next page...