After programming, use COM SKIP to skip
commercials on your TV. See Using
Commercial Skip on page 48.
Use to turn on or off the key backlight.
When this feature is activated, keys will
remain backlit for 5 seconds after the last key
press. In the setup mode, backlighting
will remain on for 30 seconds.
Use SET for all programming sequences.
Press VCR once to control your VCR.
Press POWER once to turn on or off the
selected device (e.g, VCR).
Press MENU once to display your VCR's
Use GUIDE to display your VCR/PVR's
program guide or setup menu (if applicable).
Use EXIT to exit from your VCR's guide
Use the cursor keys (
, , or ) to move
the cursor in the VCR's program guide and
menu screens. Use SELECT to choose options
from the menu or guide.
Use VOL+ (or VOL-) to raise (or lower) the
VCR's audio volume (if applicable).
Press MUTE once to turn the VCR audio off
or on (if applicable).
Use FAV to scan favorite channels and/or all
channels.See Using Channel Scan and Program-
ming Favorite Channel Scan on page 41.
Use CH+ (or CH-) to select the TV's next
higher (or lower) channel.
continued on next page...