Use the transport keys to control your
VCR,DVD or CD player,or VOD (Video
On Demand) if available on your cable
or satellite service.
To record a VCR program, press REC
Use SLEEP to activate your device's sleep
timer (not available for all devices).
After programming, press M1 ~ M3 once to
run a desired macro (see Using Macros on
After programming, press L1 ~ L4
once to activate a learned function.
See Using Learning on page 30.
Use PIP to switch the Picture-In-Picture
feature on or off (if available on your TV).
Use MOVE to move the window picture
to different positions in the main picture.
Use SWAP to switch images and sound
between the main and window pictures.
After programming, use COM SKIP to skip
commercials on selected devices (i.e., TV, VCR,
DVD, CBL, and SAT). See Using Commercial
Skip on page 48.
Use to turn on or off the key backlight.
When this feature is activated, keys will
remain backlit for 5 seconds after the last key
press. In the setup mode, backlighting
will remain on for 30 seconds.
Use SET for all programming sequences.