Sleeptimer - One for All URC-7530 User Manual & Code Book

Advanced Features

Sleeptimer

Sleeptimer is a feature which comes built into many TVs. It
allows you to set your device to turn off within a certain
amount of time. This feature comes in handy if, for example,
you enjoy falling asleep with your television on.
With the ONE FOR ALL, there are two ways to use the
sleeptimer. If your TV came with this feature built in, follow
the instructions "Device Sleeptimer" below. If your device did
not come with this feature, follow the instructions "ONE FOR
ALL Sleeptimer"
Device Sleeptimer
If your TV has a "Sleeptimer" function built in, you can access
this function with your ONE FOR ALL remote. To do so:
1 Make sure your TV is switched on.
Press the device key (TV).
2
3 Point the ONE FOR ALL at your TV and
press and release MAGIC then press
POWER. You should see the Sleeptimer
activate on your TV screen.
To increase the timer, simply press
POWER again (within 5 seconds) until the
timer gets to the desired time.
To deactivate the Sleeptimer, repeat steps 1-3 above. During
step 3, continue pressing Power until the timer indicates zero
minutes.
Important note: Remember, your device must have its own
Sleeptimer function in order for the above instructions to operate.
If your device does not have its own Sleeptimer, follow the
instructions outlined on the next page.
21