Checking Fluid Levels; Reading The Manuals And Viewing The Training Materials - Toro 30344 Operator's Manual

12

Checking Fluid Levels

No Parts Required
Procedure
1. Check the rear axle lubricant level before the engine is
first started, refer to Checking the Rear Axle Lubricant.
Check the hydraulic fluid level before the engine is first
started, refer to Checking the Hydraulic Fluid Level.
2. Check the engine oil level before and after the engine is
first started, refer to Checking the Engine Oil Level.
13
Reading the Manuals and
Viewing the Training Materials
Parts needed for this procedure:
2 Operator's Manual
1 Engine Operator's Manual
1 Parts Catalog
1 Operator Training Material
1 Pre-delivery Inspection Sheet
1 Certificate of compliance
1 Certificate of Quality
1 Roll pin
2 Bolt (5/16 x 1-3/4 inches)
2 Lock nut (5/16 inch)
2 Cylinder pin
4 Cotter pin (3/16 x 1-1/2 inches)
2 Brake return springs
Procedure
1. Read the manuals.
2. View the Operator training materials.
3. Save the roll pin, bolts (5/16 x 1-3/4 inches), and
locknuts (5/16 inch) to secure the universal shaft to
an implement.
4. Save the cylinder pin and cotter pin (3/16 x 1-1/2
inches) to secure the deck lift arms to the lift cylinder.
5. Save the brake return springs to mount the deck lift
arms.
23