Installing The Exhaust Guard (Ce Only) - Toro 30849 Operator's Manual

1
1. CE lock bracket
4. Align the washers with the holes on the inside of
the hood.
5. Rivet the brackets and the washers to the hood
(Figure 6).
6. Hook the latch onto the hood latch bracket
(Figure 7).
1
1. Hood latch
7. Screw the bolt into the other arm of hood lock
bracket to lock the latch in position (Figure 8).
Tighten bolt securely but do not tighten nut.
3
2
1
1. Bolt
2. Nut
2
G012629
Figure 6
2. Bolt and nut assembly
G012630
Figure 7
G012631
Figure 8
3. Arm of hood lock bracket
4
Installing the Exhaust Guard
(CE Only)
Parts needed for this procedure:
1 Exhaust guard
4 Self-tapping screw
Procedure
1. Position the exhaust guard around the muffler while
aligning the mounting holes with the holes in the
frame (Figure 9).
1. Exhaust guard
2. Secure the exhaust guard to the frame with 4
self-tapping screws (Figure 9).
16
Figure 9