Setup; Installing The Decals (Ce Machines Only) - Toro Groundsmaster 4500-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Declaration of Conformity
Ignition keys
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Installing the Decals (CE
Machines Only)
Parts needed for this procedure:
1 Warning decal
1 CE decal
1 Production-year decal
Procedure
On machines requiring CE compliance, replace the
warning decal, CE decal, and the production-year
decal (Figure 3).
Description
Warning decal
CE decal
Production-year decal
Hood-latch bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
No parts required
No parts required
No parts required
Qty.
1
1
1
1
2
1
1
1
–
–
–
Qty.
1 Review before operating the machine.
1 Refer to the manual for additional maintenance information.
1
2 Start the engine.
1. Warning decal
2. CE decal
12
Use
Replace the decals (CE machines only).
Install the hood latch (CE machines
only).
Adjust the roller scraper (optional).
Install the mulching baffle (optional).
Prepare the machine.
Use
Figure 3
3. Production-year decal
g297728