Throttle Lever Adjustment - BOMBARDIER 2006 outlander max 400 Operator's Manual

NOTE: Slide cable in clip slot and remove the
end of cable from clip.
V07I0IY
Remove the carburetor side cover.
V07F04Y
Insert the needle of lubricant can in the end of
throttle cable adjuster.
WARNING
Always wear eye protection and gloves
when you lubricate a cable.
V07I0JY
NOTE: Place a rag around the throttle cable
adjuster to prevent the lubricant from splash-
ing.
Add lubricant until it runs out at carburetor end
of the throttle cable.
Reinstall and adjust the cable.

Throttle Lever Adjustment

Slide rubber protector back to expose throttle
cable adjuster.
Loosen lock nut then turn the adjuster to ob-
tain correct throttle lever free play.
NOTE: Measure throttle free play at the tip of
throttle lever.
143