Brake Lever Lock; Transmission Lever - BOMBARDIER 2006 outlander max 400 Operator's Manual

2
V07K02Y
TYPICAL

1. Brake lever lock

2. Press to apply parking brakes
R: Reverse
This allows the vehicle to go backward. The
vehicle speed is limited.
WARNING
Before moving vehicle in reverse, ensure
the path behind is clear of obstacles or by-
standers. Remain seated.
N: Neutral
This position disengages the transmission to
allow manual vehicle movement.
6) Multi-Function Switch
1
To release mechanism: Squeeze brake lever.
Lever lock should automatically return to its
original position. Brake lever should return to
rest position. Always release brake lever lock
before riding.

5) Transmission Lever

Located on the right side of vehicle. A 5-posi-
tion lever: P, R, N, H and L.
To change the transmission position, com-
pletely stop vehicle then move lever to the de-
sired position. Do not force lever. If unable to
shift, rock the vehicle back and forth to move
the gears in the transmission and try again.
V07D07Y
TYPICAL – SHIFT PATTERN
CAUTION: Always completely stop the vehi-
cle and apply the brake prior to moving the
transmission lever.
P: Park
This position locks the transmission to help
prevent vehicle movement. Always use when
the vehicle is not in operation. In some cir-
cumstances, it may be necessary to rock the
vehicle back and forth to move the gears in
the transmission to allow the park to be en-
gaged.
H: High gear
This selects the high speed range of the
transmission in the gear box. It is the normal
driving speed range. It allows the vehicle to
reach its maximum speed.
L: Low gear
This selects the low speed range of the trans-
mission in the gear box. It is the working po-
sition. It allows the vehicle to move slowly with
the maximum traction and power.
NOTE: Use the low speed range to pull any
load or to climb a steep incline.
The multi-function switch is located on the left
side of handlebar.
85