Sewing preparation
> Pull the excess thread over the thread cutter at the engaging lever and cut.
> Push the engaging lever towards the bobbin.
> Move the slide on the display using the touchscreen pen or the finger to adjust the winding speed.
> Push the engaging lever to the right to stop the winding process.
> Push the engaging lever towards the bobbin again to continue the winding process.
> Remove the bobbin and cut the thread using the thread cutter at the engaging lever.
Threading the bobbin thread
> Raise the needle.
> Switch the machine off.
> Open the bobbin cover.
> Press the bobbin case release at the bobbin case (1).
> Remove the boobin case.
> Remove the bobbin from the bobbin case.
46
– The machine winds and the display to wind the bobbin appears.
– As soon as the bobbin is full, the machine stops the winding process automatically.
036045.50.04_2014-10_Manual_B720_EN
1