Selecting The Needle; Selecting The Needle Type And The Needle Size - Bernina 720 User Manual

Embroidery
> Loosen the fixing screw using the grey Torx screwdriver.
> Pull the needle down.
> Hold the needle with the flat side to the back.
> Insert the needle as far as it will go.
> Tighten the needle clamp using the grey Torx screwdriver.

Selecting the needle

After having changed the needle, it can be checked whether or not it is suitable to be used together with the
selected stitch plate.
> Touch the icon «Needle/Stitch plate selection».
> Select the attached needle.

Selecting the needle type and the needle size

Convenient memory function: To prevent a loss of information, the needle type and the needle size can be
saved additionally on the machine. The saved needle type and the saved needle size can be checked at any
time.
> Touch the icon «Stitch plate/Needle selection».
126
– If the selected needle is suitable in combination with the stitch plate, sewing can be started.
– If the selected needle is not suitable in combination with the stitch plate, starting the machine is
automatically prevented.
036045.50.04_2014-10_Manual_B720_EN