Table of Contents
Advertisement
Figure 7
1. Filler neck cap
6. Check the fluid level on the dipstick (Fig. 8).
The fluid level should be between the marks on the
dipstick.
Operation
Traction Unit Overview
Figure 9 contains a front and back view of the traction unit. Familiarize yourself with all of the traction unit components
listed in Figure 9.
1
m-7571
1. Track
2. Lift cylinder
3. Cylinder lock
Note: Determine the left and right sides of the machine by standing in the operator's position.
1
m–7466
6
5
7
8
Figure 9
4. Loader arm
5. Hood
6. Auxiliary hydraulic couplers
1. Dipstick
7. If the level is low, add enough fluid to raise it to the
proper level.
8. Install the cap on the filler neck.
4
3
m-7572
7. Tilt cylinder
8. Mount plate
9. Control panel
13
1
m–7467
Figure 8
10
2
10. Rear access cover
11. Reverse safety plate
9
11
Advertisement
Table of Contents
