Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Service
Interval
8 hours
25 hours
50 hours
100 hours
200 hours
300 hours
400 hours
Yearly/Storage
1
More often in dusty, dirty conditions.
2
Change oil after the first 50 operating hours.
3
Change the hydraulic filter after the first 8–10 operating hours.
4
For severe duty or rental applications, change every 100 operating hours.
5
For severe duty or rental applications, change every 200 operating hours.
6
Check the hydraulic fluid level before using the traction unit for the first time.
Maintenance Procedure
• Grease the traction unit
• Check engine oil level
• Check for loose fasteners
• Inspect the tracks for damage or wear
• Change hydraulic filter after the initial 8-10 operating hours
• Check hydraulic oil level
• Inspect hydraulic lines for leaks
• Clean the foam pre-filter and the paper air filter
1, 2
• Change engine oil
• Replace the paper air filter
• Check battery electrolyte level
• Adjust the track tension
• Check battery cable connections
• Check the spark plug
1, 3, 5
• Change hydraulic filter
• Replace the spark plug
• Inspect fuel lines for leaks
• Change hydraulic oil and filter
• Check for loose fasteners
• Touch up chipped paint
• Adjust the track tension
• Check tracks and road wheels
• Complete all yearly maintenance procedures specified in the engine operator's
manual
• Charge the battery and disconnect the cables (storage only)
• Drain the gasoline (storage only)
22
6
1
1
1
3
Advertisement
Table of Contents
