Filling The Engine With Oil - Toro 38564 CCR 6053 Operator's Manual

2
Installing the Discharge Chute
Parts needed for this procedure:
1 Discharge chute
1 Chute handle
3 Phillips-head bolts
3 Washers
3 Locknuts
Procedure
Install the discharge chute as shown (Figure 7).
Figure 7
3

Filling the Engine with Oil

No Parts Required
Procedure
Your machine does not come with oil in the engine, but it
does come with a bottle of oil.
Important: Before starting the engine, fill the engine
with oil.
Note: The bottle of oil may contain an ounce or 2 more than
the engine requires. Do not overfill or under fill the engine.
Max fill: 0.6 l (20 oz.), type: automotive detergent oil with an
API service classification of SJ, SL, or higher.
Use Figure 8 below to select the best oil viscosity for the
outdoor temperature range expected:
1. Move the machine to a level surface.
2. Clean around the oil-fill cap (Figure 9).
1. Oil-fill cap
6
Figure 8
Figure 9