LG AC Smart Installation And Owner's Manual page 41

2
. 'Unit Management' screen is displayed to register a unit. Enter the unit information and press [Add]
button.
See the following table for the information to enter.
Item
Product type
Name
Address
Model
Capacity
Enter the type of unit
- Air conditioner
- Ventilator
- On/Off device
Enter the name of unit. The name can be entered to maximum of 20
letters.
Enter the physical address of the unit. The physical address value is a
number in the range of 00~FF and cannot be duplicated.
Enter the model of the unit. Maximum of 20 characters can be entered
for the model.
Enter the maximum power consumption of the unit. The power must
not exceed the set value. You can enter up to maximum of 5 digits.
After entering unit
information, click on
[Add] button
Specifications
Installation/Owner's Manual
2. AC Smart Installation
2-26