LG AC Smart Installation And Owner's Manual page 166

4. Operating AC Smart
2
. You must add the event. Set the starting date and time of the event from 'Edit date and time'.
Set event date and time
3
. You can set the control command to designate which operation to execute or select daily pattern
and apply as event for the unit. To set the event through control command, check the check box in
front of the 'Control command' to select the control command. If you want to set the event through
daily pattern, check the check box in front of the 'Daily pattern' to designate the daily pattern. Refer
to the following chart for the operation you can select for 'Control command'.
Set operation for control
command, select applicable
pattern for daily pattern
4-48
AC Smart