LG AC Smart Installation And Owner's Manual page 169

Item
Maximum/Minimum
temperature setting
Reference: Individual lock function and maximum/minimum
temperature setting
Mode lock, fan level lock, set temperature lock and maximum/minimum temperature setting may
not be displayed according to the setting when registering the unit to AC Smart.
To use the individual lock function and maximum/minimum temperature function, you must check
the 'Detail lock function model' located in 'Setting' menu, and save the setting.
Ventilator
Item
Operation
Mode
Fan level
Minimum set temperature - You can set the minimum indoor temperature that can be
permitted.
Maximum set temperature - You can set the maximum indoor temperature.
You can set the operation and stopping of the ventilator.
- Operation: You can operate the ventilator.
- Stop: You can stop the operation of the ventilator.
You can designate the operating mode of the ventilator.
- Heat: Both inlet/outlet go through heat exchange device for ventilation. Use this
mode during summer and winter when the difference between the indoor and
outdoor is significant in terms of temperature and humidity.
- Normal: The exhaust air is ventilated without going through the heat exchanger.
Use this mode during spring and fall when the difference between the indoor and
outdoor is not too significant in terms of temperature and humidity.
- Auto: This measures the indoor temperature and outdoor temperature and
automatically controls inlet and outlet. With this, the balance of the indoor air is
maintained to maintain the optimal condition.
This sets the fan speed of the ventilator. You can adjust the level by considering the
indoor level of contamination.
- Low: This sets the fan level to low.
- High: This sets the fan level to high.
- Super: This sets the fan level to maximum speed.
- Auto: This is set to maintain the optimal condition by measuring the indoor level of
contamination automatically.
4. Operating AC Smart
Description
Description
Installation/Owner's Manual
4-51