LG AC Smart Installation And Owner's Manual page 167

Item
Set temperature
Operation/stop
Mode
Fan level
Lock
4
. If you want to set the operation of the unit in detail from 'Control command', click on the [Detail]
button. 'Detail control' screen to set the detail operation is displayed. After selecting the event
operation, click on [OK] button. Refer to the following chart for operations you can select from
'Detail control'.
You can set the desired indoor temperature.
You can set the operation and stopping of the indoor unit.
You can set the operating mode of the indoor unit.
- Cool: This operates the indoor unit to run cool operation. Execute when the indoor
temperature is high.
- Heat: This operates the indoor unit to run heat operation. Execute when the indoor
temperature is low.
- Auto: The unit evaluates the indoor condition and maintains optimal condition
automatically.
This sets the fan speed of the ventilator. You can adjust the level by considering the
indoor level of contamination.
- Low: This sets the fan level to low.
- Med: This sets the fan level to med.
- High: This sets the fan speed to high.
You can set the lock function of air condition so that the user cannot control the air
conditioner individually.
- All lock: Enable lock function.
- All unlock: This disables the lock function.
After setting detail operation,
click on [OK] button
4. Operating AC Smart
Description
Installation/Owner's Manual
4-49