LG AC Smart Installation And Owner's Manual page 59

Monitoring
As the status information, the displayed information is as follows.
Displayed item
Mode
Wind direction
Lock
Alarm
Indoor temperature
Set temperature
Fan level
Advanced
The operating mode of the unit is displayed.
- Cool: When the unit is in cool operation
- Heat: When the unit is in heat operation
- Auto: When the unit is in auto operation
Reference: What is auto operation
Auto operation refers to the method of operating the unit
automatically to maintain optimal environment by measuring and
comparing the indoor and outdoor temperature.
Wind direction setting status is displayed.
- ON: When it is set for the direction of the wind to move up and down
- OFF: When it is set for the direction of the wind to blow in one direction
Lock function setting status to disable all functions of each unit so that
the user cannot control the units via remote controller is displayed.
- Enable: Condition lock function is enabled
- Cancel: Condition lock function is disabled
When there is currently no alarm generated in the unit, '0' is displayed.
When there is an alarm generated, the alarm code of the applicable
alarm is displayed.
The average indoor temperature where the unit is installed is displayed.
The average temperature of the set indoor temperature where the unit is
installed is displayed.
Current level of fan is displayed.
'Monitoring' window to show the detail status information is displayed.
Description
Installation/Owner's Manual
3. AC Smart Menu
3-15