Kenmore 405.84086 Use & Care Manual page 19

• If this button is pressed for more than 2 seconds, the system will automatically store the
current operation settings including operating mode, setting temperature, fan speed level
and sleep feature (if activated). Then the next time the button is pressed, the remote will
transmit these stored setting to the unit.
11 FAN SPEED Button
Used to select the fan speed in four steps:
AUTO LOW
12 TIMER ON Button
Press this button to initiate the Auto-on time sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When the setting time displays 10H, each press
will increase the auto-timed setting in 60 minutes increments. To cancel the auto-timed
program, simply adjust the Auto-on time all the way back to 0.0.
13 TIMER CANCEL Button
Press this button to cancel the auto-timed program. NOTE: If th e unit is running in timer
mode, when you press this button, the function will be cancelle d, and the unit will turn off.
14 TIMER OFF Button
Press this button to initiate the auto-off time sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When the setting time displays 10H, each press
will increase the auto-timed setting in 60 minutes increments. To cancel the auto-timed
program, simply adjust the auto-off time to 0.0
15 LOCK Button
When you press the recessed LOCK button, all current settings are locked in and the
remote controller does not accept any operation except that of the LOCK button. Press
again to cancel the LOCK mode.
HIGH
19