Kenmore 405.84086 Use & Care Manual page 14

ACCESSORIES
PART
ERROR CODES AND PROTECTION CODE:
E1- Room temperature sensor error - Unplug the unit and plug it back in. If error repeats, arrange
for service.
E2- Evaporator temperature sensor error - Unplug the unit and plug it back in. If error repeats,
arrange for service.
E3- Condenser temperature sensor error - Unplug the unit and plug it back in. If error repeats,
arrange for service.
E4- Display panel communication error - Unplug the unit and plug it back in. If error repeats,
arrange for service.
P1- Bottom tray is full - Connect the drain hose and drain the collected water away.
If error repeats, arrange for service.
OPERATING INSTRUCTIONS
COOL operation
1. Press the "MODE" button until the "COOL" indicator light comes on.
2. Press the "+" or "-" buttons to select your desired room temperature.
The temperature can be set within a range of 62ºF (17ºC) - 88ºF (30ºC).
3. Press the "FAN" button to choose the fan speed.
PART NAME
Exhaust hose and Adaptor I
(narrow mouth) and Adaptor B
(round mouth), Window Slider
and Screw
Foam Seals: 2 Adhesive,
1 Non-adhesive
Remote Control and Battery
Drain hose and drain hose adaptor
14
QUANTITY
1 set
3pc
1pc
1pc