Setting Up Your Machine; Loose Items Inventory; Accessories Warning - Lassco Spinnit FMM-2 User Manual

3 - Setting Up Your Machine

3.1 - Loose Items Inventory

Please remove and inspect the following items:
FMM6-651A: Master Chip
Chute (1)
(This item may be installed)
Hollow Drill Bits (2)
(these items may be installed)
FM4-4006: Paper Side
Stops (2)

3.2 - Accessories Warning

USE RECOMMENDED ACCESSORIES. Only use accessories approved by a Lassco-Wizer. The use of improper acces-
sories may cause risk of injury to persons.
FMM6-652A: Chip Bag
Assembly (1)
SPIN-EZE: Drill Bit Short Set
Lubricant (1) Screws (2)
FM4-4007: Side Stop
Screws (4)
FM4-4001: 25" Drill Strip (1)
(this item comes installed)
MS-1: Drill Sharpener (1)
EBM-32: Chuck Re- FMM9-957A: Spindle
lease Key (1) Rotation Tool (1)
HEX-332: Hex Wrench
3/32" (1)
CC-2: Chip Clearer (1)
EBM-41: Sharpening
Stone (1)
HEX-732-T: Hex Wrench
7/32" T Style (1)
Page 05