Removing The Hard Disk Drive - Clevo M660JE Service Manual

Disassembly

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
Figure 2
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
HDD Assembly
Chapter 4 of the User's Manual) when setting up a new hard disk.
Removal
Hard Disk Upgrade Process
a. Locate the HDD bay cov-
er and remove the
1. Turn off the computer, and remove the battery
screws.
2. Locate the hard disk bay cover and remove the screws (
b. Remove the bay cover.
3. Remove the bay cover
a.
New HDD's are blank. Before you begin make sure:
4. HDD Bay Cover
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your operating system and programs.
• 3 Screw
If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan
to install. Copy these to a removable medium.
2 - 6 Removing the Hard Disk Drive
l
(page 2 - 5).
1
.
6
4
b.
1
3
2
HDD System Warning
- ).
3
4