Removing The Wireless Lan Module - Clevo M720T Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
a. Remove the cover.
4. The Wireless LAN module
b. Disconnect the cables
5. Lift the Wireless LAN module
and remove the screw.
c. The WLAN module will
a.
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to "1" + "2"
socket (Figure b).
c.
5. WLAN Module.
• 1 Screw
2 - 14 Removing the Wireless LAN Module
- , then remove screw
2
3
will pop-up.
5
(Figure 10d) up and off the computer.
Note:
1
Only one model is pic-
tured here, however
the component loca-
tions are the same for
both models.
5
(page 2 - 5) and the component bay cover
on the mainboard.
1
from the module socket.
4
b.
d.
(page 2 - 9) .
4
3
2