Removing The Bluetooth Module - Clevo M720T Service Manual

Removing the Bluetooth Module

1. Turn off the computer, remove the battery
2. The Bluetooth module will be visible at point
3. Remove screw and carefully disconnect the cable
2
4. Lift the Bluetooth module
5
a.
1
b.
4
2
3
(page 2 - 5).
on the mainboard.
1
and separate the module from the connector
3
up and off the computer.
c.
Note:
Only one model is pic-
tured here, however
the component loca-
tions are the same for
both models.
.
4
5
Removing the Bluetooth Module 2 - 15
Disassembly
Figure 11
Bluetooth Removal
a. Remove the cover and
locate the Bluetooth
module.
b. Remove the screw and
disconnect the cable and
seperate the connector.
c. Lift the Bluetooth module
out.
5. Bluetooth Module
• 1 Screw