Setting The Date And Time - Omron ELITE 7300W Instruction Manual

SETTING THE DATE AND TIME

Set the monitor to the current date and time before taking a measurement
for the first time. If the date and time are not set correctly, the
measurement values stored in the memory and the average values may
not be correct.
The Blood Pressure Monitor automatically stores up to 84 individual
measurements values with the dates and times.
The monitor can also calculate an average reading based on the three
most recent measurements taken within 10 minutes.
NOTES: • If only two readings are stored in the memory for the
10-minute period, the average is based on the two readings.
• If one reading is stored in the memory for the 10-minute
period, this reading is displayed as the average.
1. TO START THE SETTING
Press and hold the Date/Time Setting button
( ) to adjust the date and time.
The year flashes on the display.
16