Omron ZS-MDC User Manual page 46

Section 3
About Setup
↑ UP key
↓ DOWN key
MENU key
SET key
ESC key
●
TEACH Mode
In this mode, the measured value is displayed at all times on the main display. The
threshold values are displayed on the sub-display. Which of the HIGH or LOW threshold
values is displayed changes according to the setting of the threshold selector switch.
TEACH MODE
MENU : TEACHING
Key Operations
Function keys
← LEFT key
→ RIGHT key
↑ UP key
↓ DOWN key
MENU key
SET key
ESC key
ZS-MDC
3-8
User's Manual
Key Measured Value Display
↑ UP key: Executes trigger input.
↓ DOWN key: Executes reset
input.
Displays the display customize
menu.
Executes a zero reset.
Hold down for at least two sec-
onds to cancel a zero reset.
Displayed alternately
Key
Not used
Not used
Not used
Registers the measured value
when this key is pressed as the
threshold value.
Not used
Not used
The function changes depend-
ing on the settings.
• Changes numerical values.
• Changes text.
Returns to the top of the display
customize menu.
Applies numerical value settings.
Returns to the previous menu.
When the top menu is displayed,
returns to the measured value
display.
TEACH MODE
: DIRECT IN
TEACHING
Not used
Selects the digit in the threshold
numerical value.
Changes the threshold numerical
value.
Not used
Applies the newly set threshold
value.
Cancels the newly set threshold
value.
Display Customize Menu
DIRECT IN