Omron ZS-MDC User Manual page 69

[SENSING]-[CALC]-[CALC]-[AVE]
3.
Set input A to input C for calculating the
average to ON, and other inputs to OFF.
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
4.
Select [TASK1] so that the judgment on the
average value can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
4.
Select [TASK1] so that the average value can
be linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
Measuring the Average Height
1 INPUT A 2INPUT B
3INPUT C
1 TASK1 2 TASK2
3 TASK3 4 TASK4
1 TASK1 2 TASK2
3 TASK3 4 TASK4
Section 4
ZS-MDC
4-13
User's Manual