Positioning The Seat; Unlatching The Seat; Pushing The Machine By Hand - Toro Z580-D Z Master 74266 Operator's Manual

Figure 24
Position C
This is the full open position. The suggested use for
this position is as follows.
• Use in tall, dense grass mowing conditions.
• Use in wet conditions.
• Lowers the engine power consumption.
• Allows increased ground speed in heavy conditions.
• This position is similar to the benefits of the Toro
SFS mower.
Figure 25

Positioning the Seat

The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
Important: To adjust, move the lever sideways to
unlock seat (Figure 26).
Slide the seat to the desired position and release lever
to lock in position.
1. Adjustment lever

Unlatching the Seat

1. Move the seat to the most rearward position. This
will prevent interference when the seat is raised.
2. Push the seat latch rearward to unlatch the seat.
3. Raise the seat up. This will allow access to the
machine under the seat (Figure 27).
1. Seat latch
2. Fuel cap

Pushing the Machine by Hand

Important: Always push the machine by hand.
Never tow the machine because hydraulic damage
may occur.
25
Figure 26
Figure 27
3. Seat