Product Overview; Controls - Toro Z580-D Z Master 74266 Operator's Manual

Product Overview

1. Motion control lever
2. Parking brake lever
3. Height-of-cut lever
4. Fuel cap (both sides)

Controls

Become familiar with all the controls before you start the
engine and operate the machine (Figure 3 and Figure 4).
Figure 3
5. Controls
6. Seat belt
7. Roll bar
8. Engine screen
110-0819
1. Hour meter
2. Ignition switch
3. Fuel selector valve
4. Audible alarm
5. Glow plug switch
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 4).
Safety Interlock Indicators
There are symbols on the hour meter and they indicate
with a black triangle that the interlock component is in
the correct position (Figure 5).
Battery Indicator Light
When the ignition key is initially turned to the Run
position for a few seconds, the battery voltage will be
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 5).
13
Figure 4
6. Glow plug light
7. Engine Temperature light
8. Throttle control
9. PTO Switch