Checking The Swingarm; Checking The Throttle Cable Routing; Checking The Rubber Grip - KTM 450 SX-F Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.44

Checking the swingarm

11.45

Checking the throttle cable routing

11.46

Checking the rubber grip

x
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the fuel tank bracket.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
C00495-10
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
» If a rubber grip is damaged, worn or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) (
401197-01
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 47)
x ( p. 51)
( p. 53)
x
p. 47)
p. 102)
58