Installing your dishwasher
B. To fix the product at the sides (when the material of the counter top is not appropriate
for drilling)
1. Insert the product under the sink completely.
2. Remove upper and lower caps from both side with a tool such as a flat-head screwdriver as shown in
figure.
Do not remove middle caps from both side.
CAUTION
Do not discard the removed plastic caps.
CAUTION
3. Pre-drill the holes with a 2-pi drill bit to a depth of 10 ~ 12 mm and fasten the 4 screws
4. Reinstall the plastic caps to their original position.
Failing to do so may result in fire or electric shock due to water leakage.
CAUTION
20_ Installing your dishwasher
DD68-00132A-02_S04_140602_EN.indd 20
3
.
3
2/6/2014 18:36:45