Installing The Dishwasher; Step 1 Check The Parts And Tools - Samsung DW80H995 Series Installation Manual

Be sure that you or your installer follow these instructions closely so that the new
dishwasher works properly and that you are not at risk of injury when washing dishes,
STEP 1 CHECK THE PARTS AND TOOLS
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts required
Provided with the dishwasher. Check when you unbox the dishwasher in Step 5.
2 Screws
Hose Clamp
4 Installation Brackets (For the installation Drain Hose (for Drain Hose)
bracket)
Kick Plate
Hose Fixer
(for Drain Hose)
7 Screws
(for the kick plate &
Hose Fixer)
sound_absorber
(in front of Base)
(ON SOME MODELS)
Not provided
Twist on wire
Power cable Strain relief
connector
Electrical tape &
Standard duct tape
Hot water supply !ine
o©
i i i
90 ° Eibow(S/s'') Tube fittings Teflon®tape or Sealing
compound
2 Screws for the Side
Hose clamp Air gap Rubber connector walls
[Length : 1" (25mm)]
For the hot water supply line - We strongly recommend using %" minimum O.D. copper tubing with a
compression fitting or a flexible stainless steel braided hot water supply line.
[Warning: Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside
the tube fitting.]
You also need a 900 elbow with %" N.RT. external pipe threads on one end and a fitting sized to fit
your hot water supply line (copper tubing/compression fitting or braided hose) on the other.
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some local codes
may require the cable to have a BX style metal jacket.
6 installing the dishwasher
DWSOH9950US 00151A 06 EN 150216illdd See3:6