Table of Contents
Advertisement
Technical Information (continued)
Cable specifications
(When connected to a personal computer)
Control commands
The following commands are used for control of the projector with a computer. (Operation commands)
Command
Control contents
PON
Power on
POF
Power off
AVL
Volume
IIS
Input
Lamp condition
Q$S
query
OSH
AV mute
NOTE:
If STANDBY MODE is set to ECO, only PON and Q$S command can be used in the standby mode.
MENU LOCK PASSWORD
To reset the password to the default setting AAAA, perform the following when the MENU LOCK PASSWORD
request screen is displayed.
1) Press and hold the <AUTO SETUP> button of the remote control or the <INPUT SELECT> button of the
PASSWORD HAS BEEN INITIALIZED. is displayed on the MENU LOCK PASSWORD request screen.
54
ENGLISH
the lamp is not turned back on again straight away in order to protect the lamp.
Parameter:
000 - 063 (Adjustment value 0 - 63)
Parameter:
VID = VIDEO
SVD = S-VIDEO
RG2 = COMPUTER 2 IN
Call back:
0 = Standby
1 = Lamp on control active
Turn off the projection and sound temporarily.
Send the command to switch between off and on. (
Do not send the command consecutively.
0 = Off
1 = On
Projector
RG1 = COMPUTER 1 IN
2 = Lamp on
3 = Lamp off control active
page 25)
PC
(DTE)
Advertisement
Table of Contents
