Table of Contents
Advertisement
Remote control operation (continued)
ENLARGE THE IMAGE
You can enlarge the projected image to the center
position by emphasizing within the range of 1× to 2×.
DIGITAL ZOOM
Press [RETURN] or [MENU] to escape.
[DIGITAL ZOOM] button operation
+ button: zooms in
- button: zooms out
Press "-"
(STANDARD)
Press "
" to shift the center point.
NOTE:
When the COMPUTER signal is input, if FRAME LOCK in
the POSITION menu is OFF,
When the COMPUTER signal is input, if FRAME LOCK in
the POSITION menu is ON,
When another signal is input, the enlargement range is from
1× to 2× by 0.1.
DIGITAL ZOOM mode is canceled when the input signal is
changed.
During DIGITAL ZOOM mode, [AUTO SETUP], [FREEZE],
[DEFAULT], [INDEX-WINDOW] and [FUNCTION] (except
when AV MUTE is assigned) buttons are not available.
The image is distorted momentarily when the image is
zoomed.
USE AN ASSIGNED FUNCTION
You can select a useful function from the list and assign
it to [FUNCTION] button as a shortcut.
FUNCTION
Press "+"
(MAXIMUM)
To display the on-
screen menu (main
menu, sub-menu or
detailed menu).
For the menu
operation, see
"OPERATE THE
MENU". (
When not using the [FUNCTION] button
1
Select DISABLE in FUNCTION BUTTON
(PROJECTOR SETUP menu).
2
Press [ENTER].
3
Select OK.
(Operation during
zoom mode)
4
Press [ENTER].
NOTE:
For details, see FUNCTION BUTTON in PROJECTOR
SETUP menu. (
enlargement range is 1× to 3×.
enlargement range is 1× to 2×.
MENU
page 28)
page 40)
FUNCTION
Press and hold for
at least 3 seconds.
ENGLISH
27
Advertisement
Table of Contents
