Table of Contents
Advertisement
Precautions with regard to safety (continued)
CAUTIONS ON USE
IN ORDER TO GET THE PICTURE QUALITY
Draw curtains or blinds over windows and turn off any
lights near the screen to prevent outside light or light
from indoor lamps from shining onto the screen.
Depending on where the projector is used, air exhaust
vents or the warm air from air conditioning can cause a
shimmering effect on the screen. For this reason, take
care not to shield the air exhaust vents and consider the
DO NOT TOUCH THE SURFACE OF THE
PROJECTOR LENS WITH YOUR BARE HAND.
onto the screen. Please put the standard lens cover on
the projector when you do not use it.
DO NOT MOVE THE PROJECTOR WHILE
IT IS OPERATING OR SUBJECT IT TO
VIBRATION OR IMPACT.
The service life of its internal components will be
shortened.
THE PROJECTOR HAS A HIGH
PRESSURE MERCURY LAMP THAT IS
CHARACTERIZED AS FOLLOWS:
The brightness of the lamp will decrease over time.
The lamp may explode or shorten the lamp life by
shocks or chipping damage.
The possibility of its bursting increases when the lamp
is used beyond the replacement time.
If the lamp bursts, gas inside the lamp is released in
the form of smoke.
The life of a mercury lamp varies according to the
individual difference or conditions of use.
In particular, turning the power on and off frequently
and/or repeatedly as well as continuous use for
10 hours will greatly affect the life cycle. Provide a
lamp for replacement in advance.
CONNECTION TO EXTERNAL DEVICE
When connecting the projector to a computer or
external device, use the power cord supplied with the
corresponding device and a commercially available
shielded interface cable.
10
ENGLISH
OPTICAL COMPONENTS
It may be necessary to replace the optical components
such as Liquid crystal panels and Polarizing plates
in less than 1 year if using the projector in a high
temperature environment or in a very dusty, oily smoke
or tobacco smoke environment. For more details,
please contact your dealer.
LIQUID CRYSTAL PANEL
The Liquid crystal panels are precision-made. Note that
in rare cases, pixels of high precision could be missing
or always lit, but this is not a malfunction.
Do not project the same image for long periods of
time, as this may remain as an afterimage on the liquid
crystal panel. Display the white screen test pattern for
more than an hour to remove it. See "TEST PATTERN"
on page 41.
SECURITY
TAKE SAFETY MEASURES AGAINST
FOLLOWING INCIDENTS.
Personal information being leaked via this product.
Unauthorized operation of this product by a malicious
third party.
Interfering or stopping of this product by a malicious
third party.
SECURITY INSTRUCTION
or others.
Change your password regularly.
Do not use a password that is simple to guess.
directly inquire about your password.
Do not share your password with the general public.
Set a password, and place restrictions on the users
who can log in.
Advertisement
Table of Contents
