Table of Contents
Advertisement
Important Safety Notice (continued)
CAUTION:
To assure continued compliance, follow the attached installation instructions, which includes using
the provided power cord and shielded interface cables when connecting to computer or peripheral
to operate.
Pursuant to at the directive 2004/108/EC, article 9(2)
Pursuant to at the directive 2005/32/EC amended by 2008/28/EC, article 14
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, F.R. Germany
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin power plug for your safety and convenience. A 13 amp fuse is
amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be
purchased from an Authorized Service Center.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this power cord are colored in accordance with the following code:
As the colors of the wire in the power cord of this appliance may not correspond with the colored markings identify-
ing the terminals in your plug, proceed as follows.
The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug
which is marked with the letter E or by the Earth symbol
YELLOW.
The wire which is colored BLUE must be connected to the terminal in the plug which is marked with
the letter N or colored BLACK.
The wire which is colored BROWN must be connected to the terminal in the plug which is marked
with the letter L or colored RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
or the BSI mark
on the body of the fuse.
Green - and - Yellow:
Blue:
Brown:
Earth
Neutral
Live
or colored GREEN or GREEN - AND -
ENGLISH
3
Advertisement
Table of Contents
